Turnbuckle scaffold
Product Description
>>>
The turnbuckle scaffold is a new type of scaffold, which was introduced from Europe in the 1980s. It is an upgraded product after the bowl buckle scaffold. It is also known as chrysanthemum disc scaffold system, plug-in disc scaffold system, wheel disc scaffold system, buckle disc scaffold, layer frame and Leia frame, because the basic principle of the scaffold is invented by layher company in Germany and is also called "Leia frame" by people in the industry. It is mainly used for lighting frame and background frame of large-scale concert.), The socket of this kind of scaffold is a disk with a diameter of 133mm and a thickness of 10mm. 8 holes are set on the disk φ 48 * 3.2mm, Q345A steel pipe is used as the main component. The vertical rod is welded with a disc every 0.60m on a certain length of steel pipe. This novel and beautiful disc is used to connect the cross rod with a connecting sleeve at the bottom. The cross bar is made of a plug with a pin welded on both ends of the steel pipe.
Related products
-
screw
Product Description >>> The split screw is used for the tie between the inner and outer formwork of the wall to bear the lateral pressure and other loads of the concrete, so as to ensure that the spacing between the inner and outer formwork can meet the design requirements, and it is also the fulcrum of the formwork and its supporting structure. Therefore, the arrangement of split bolts has a great impac...
-
Steel support
Product Description >>> 1. Introduction to adjustable steel support: The adjustable steel support (steel pillar) is composed of lower casing, upper intubation and adjustable device. The upper intubation is drilled with equally spaced bolt holes, The upper part of the casing is provided with an adjustable wire sleeve, which can flexibly adjust various heights of the column, and the installation is conveni...
-
Three section water stop screw
Product Description >>> The vertebral body type water stop screw can be roughly divided into three parts: two outer rods and one inner rod. It has simple structure and convenient use. And the outer rod can be recycled after disassembly. In the later construction, only the middle section of the screw needs to be purchased, which has the advantages of reducing waste and reducing material cost; And improve ...
-
Quick support screw adjuster
Product Description >>> The production of solid jacking material is generally made of threaded steel and brand-new round steel Q235, and the production of hollow jacking material is generally made of extruded steel pipe. In fact, the processing technology we usually say is actually the solid jacking processing technology, which is generally divided into hot rolling and cold rolling. Hot rolling is to pas...
-
Top support and bottom support
Product Description >>> The scaffold specification stipulates that the extension length of the adjustable base and adjustable support screw of the full support frame shall not exceed (300) mm, and the length inserted into the vertical rod shall not be less than (150) mm. Jacking, an indispensable and important building tool in the process of scaffold erection and use, plays an important role. It plays th...
-
Anti slide plate of scaffold
Product Description >>> Product application: fisheye anti-skid plate is often used in harsh climate conditions or together with construction machinery, such as facilities with more oil pollution, ice and snow, slippery, vibration and scientific research machinery and equipment with poor climate conditions. In these cases, it is very important for the safety assurance of staff. Anti slip products just mee...